Line card
Datalink and RF components for uncrewed systems, sourced to order
The datalink group covers the radio chain from the transceiver to the antenna. RF transceivers from the Analog Devices AD9361 family. Low noise amplifiers, switches, filters and couplers from Qorvo, Skyworks and Mini-Circuits. GNSS, ISM band and cellular antennas from Taoglas and Linx.
Every part is sourced to order from authorized US distributors or from the maker and classified on its orderable part number before a quote is issued. NDAA-compliant sourcing applies to every maker on this page.
Datalink and RF parts on the line card
45 parts in 3 groups. Every part has a page.
Antennas
Taoglas, TE Connectivity, Molex and Amphenol RF
| Part number | Manufacturer | Description | Package | Availability | Add to request |
|---|---|---|---|---|---|
| 336313-12-0300 | Amphenol RF | RF cable assembly, AMC right angle plug to SMA straight bulkhead jack, 1.13 mm micro coax, 50 ohm, 300 mm, up to 6 GHz | Sourced to order | ||
| 1461530100 | Molex | WiFi 6E flexible balanced antenna, 2400 to 2483.5 MHz and 4900 to 5930 MHz, 100 mm cable, U.FL compatible, 9 mm wide | Sourced to order | ||
| 2111400100 | Molex | ISM flexible antenna, 868 to 870 MHz and 902 to 928 MHz, 100 mm cable, U.FL compatible, for LoRa, Sigfox and Zigbee | Sourced to order | ||
| AA.170.301111 | Taoglas | Magnetic mount active GNSS antenna for GPS, GLONASS, Galileo and BeiDou, 28 dB gain at 3 V, 3 m RG174 cable, SMA male, IP67, 53 x 50 x 17 mm | Sourced to order | ||
| AGGP.35F.07.0060A | Taoglas | Active GNSS patch antenna for GPS, GLONASS and Galileo, two stage 28 dB LNA with front end SAW filter, 35 x 35 x 6.9 mm, 60 mm 1.13 mm cable to IPEX MHF I | Sourced to order | ||
| ASGGB184.A | Taoglas | Surface mount active GNSS patch antenna, GPS L1, GLONASS G1, Galileo E1 and BeiDou B1, 18 x 18 x 6.5 mm, no cable or connector | Sourced to order | ||
| CAB.011 | Taoglas | RF cable assembly, IPEX MHF I (U.FL compatible) to SMA female straight bulkhead, 95 mm 1.13 mm cable | Sourced to order | ||
| FXP830.07.0100C | Taoglas | Flexible WiFi dipole antenna for 2.4, 5.8 and 7.1 GHz bands, ground plane independent, 100 mm 1.37 mm cable to IPEX MHF I | Sourced to order | ||
| FXUB63.54.0150C | Taoglas | Flexible wideband cellular antenna, 698 to 3000 MHz, 150 mm 1.37 mm cable to IPEX MHF4L, 96 x 21 x 0.2 mm | Sourced to order | ||
| PC104.07.0165C | Taoglas | Wideband cellular FR4 PCB antenna, 700 to 6000 MHz, 165 mm 1.37 mm cable with IPEX connector, 80 x 20.8 x 1 mm, adhesive mount | Sourced to order | ||
| TG.30.8113 | Taoglas | Wideband 5G and 4G terminal dipole antenna, 600 to 6000 MHz, hinged SMA male, no ground plane required | Sourced to order | ||
| ANT-2.4-CW-RCT-SS | TE Connectivity | Half wave swivel whip antenna, 2400 to 2500 MHz, SMA connector, for Bluetooth, Zigbee and ISM | Sourced to order | ||
| ANT-916-CW-RCS-SMA | TE Connectivity | Whip antenna, 901 to 941 MHz band, SMA connector, for LoRaWAN and LPWAN | Sourced to order | ||
| ANT-GNCP-C25L15100 | TE Connectivity | Active GNSS ceramic patch antenna, L1 and L5 bands, 25 x 25 mm, integrated LNA, 100 mm 1.13 mm cable to U.FL | Sourced to order | ||
| ANT-GNFPC-SHL15100UF | TE Connectivity | GNSS flexible PCB antenna, L1 and L5 bands, 25 x 25 mm, 100 mm cable to U.FL, adhesive mount | Sourced to order |
RF front end
Mini-Circuits, Qorvo and Skyworks Solutions
| Part number | Manufacturer | Description | Package | Availability | Add to request |
|---|---|---|---|---|---|
| BFCN-1560+ | Mini-Circuits | LTCC band pass filter, 1500 to 1620 MHz, 50 ohm, covers the GNSS L1 band | case FV1206-1 | Sourced to order | |
| BFCN-2450+ | Mini-Circuits | LTCC band pass filter, 2400 to 2550 MHz, 50 ohm | case FV1206-4 | Sourced to order | |
| HFCN-740+ | Mini-Circuits | LTCC high pass filter, 780 to 2800 MHz | case FV1206 | Sourced to order | |
| LFCN-1000+ | Mini-Circuits | LTCC low pass filter, DC to 1000 MHz, 50 ohm, 10 W power handling | 1206, case FV1206 | Sourced to order | |
| LFCN-1500+ | Mini-Circuits | LTCC low pass filter, DC to 1500 MHz, 50 ohm | case FV1206 | Sourced to order | |
| PGA-103+ | Mini-Circuits | Low noise pHEMT amplifier, 50 to 4000 MHz, high IP3, 50 ohm | SOT-89 Style, case DF782 | Sourced to order | |
| PMA3-83LN+ | Mini-Circuits | Low noise linear amplifier, 0.5 to 8 GHz, 1.3 dB noise figure, IP3 up to +35 dBm, 50 ohm | 3x3 mm QFN Style, case DQ1225 | Sourced to order | |
| RLM-33+ | Mini-Circuits | RF limiter, 30 to 3000 MHz, limits above +12 dBm input, 10 ns recovery, surface mount | case TT1224 | Sourced to order | |
| SBTC-2-10+ | Mini-Circuits | Two way core and wire power splitter, 5 to 1000 MHz, 50 ohm, surface mount | case AT790 | Sourced to order | |
| ZX60-83LN-S+ | Mini-Circuits | Connectorized low noise amplifier, 0.5 to 8 GHz, 1.4 dB noise figure at 2 GHz, SMA connectors | case GC957, SMA | Sourced to order | |
| QPA9510 | Qorvo | Power amplifier, 100 to 1000 MHz, 35.4 dBm P1dB, 33.8 dB small signal gain, 3.8 V | SMT Laminate, 3.0 x 3.0 mm | Sourced to order | |
| QPC6014 | Qorvo | Absorptive SPST switch, 5 to 6000 MHz, 0.84 dB insertion loss, 53 dB isolation, 1.8 V | DFN, 2 x 2 mm | Sourced to order | |
| QPC6044 | Qorvo | Absorptive SP4T switch, 5 to 6000 MHz, 0.98 dB insertion loss, 50 dB isolation, 5 V | QFN, 4.0 x 4.0 mm | Sourced to order | |
| QPL9058 | Qorvo | Low noise amplifier, 0.5 to 6 GHz, 0.6 dB noise figure, 18 dB gain, 36 dBm OIP3, 5 V | DFN, 2.0 x 2.0 mm | Sourced to order | |
| QPL9547 | Qorvo | Low noise amplifier, 0.1 to 6 GHz, 0.3 dB noise figure, 19.3 dB gain, 39.3 dBm OIP3, 5 V | DFN, 2.0 x 2.0 mm | Sourced to order | |
| TQL9092 | Qorvo | Flat gain low noise amplifier, 0.6 to 4.2 GHz, 0.53 dB noise figure, 22.6 dB gain, 37 dBm OIP3, 5 V | DFN, 2 x 2 x 0.85 mm | Sourced to order | |
| TQP3M9037 | Qorvo | Low noise amplifier, 0.7 to 6 GHz, 0.4 dB noise figure, 20 dB gain, +35 dBm OIP3, 5 V | DFN, 2 x 2 x 0.85 mm | Sourced to order | |
| SKY13453-385LF | Skyworks Solutions | SPDT switch, 0.01 to 6 GHz, 0.4 dB insertion loss at 2 GHz, single control line | QFN, 6L, 1 x 1 x 0.45 mm | Sourced to order | |
| SKY65404-31 | Skyworks Solutions | Low noise amplifier, 4.9 to 5.9 GHz, 1.2 dB noise figure, 13 dB gain, 3.3 V | DFN, 6-pin, 1.5 x 1.5 x 0.45 mm | Sourced to order | |
| SKY66112-11 | Skyworks Solutions | 2.4 GHz front end module for Zigbee, Thread and Bluetooth, +21 dBm PA, 2 dB noise figure LNA, 1.8 to 3.6 V | MCM, 22-pin, 3.5 x 3.0 x 0.965 mm | Sourced to order | |
| SKY67151-396LF | Skyworks Solutions | Low noise amplifier, 0.7 to 3.8 GHz, 0.25 dB noise figure at 0.9 GHz, 36 dBm OIP3, 5 V | DFN, 8-pin, 2 x 2 x 0.75 mm | Sourced to order | |
| SKY67159-396LF | Skyworks Solutions | Broadband low noise amplifier, 0.2 to 3.8 GHz, 0.95 dB noise figure at 0.7 GHz, 17.5 dB gain, 3.3 V | DFN, 8-pin, 2 x 2 x 0.75 mm | Sourced to order |
RF transceivers
Analog Devices and Semtech
| Part number | Manufacturer | Description | Package | Availability | Add to request |
|---|---|---|---|---|---|
| AD9361BBCZ | Analog Devices | RF agile transceiver, 2 x 2, 70 MHz to 6 GHz receive and 47 MHz to 6 GHz transmit, 200 kHz to 56 MHz channel bandwidth, 12 bit ADCs and DACs | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) | Sourced to order | |
| AD9363ABCZ | Analog Devices | RF transceiver, 2 x 2, 325 MHz to 3.8 GHz, up to 20 MHz channel bandwidth, 12 bit ADCs and DACs | 144-Ball CSPBGA (10mm x 10mm x 1.7mm) | Sourced to order | |
| ADRV9002BBCZ | Analog Devices | Dual channel RF transceiver, 30 MHz to 6 GHz, 12 kHz to 40 MHz transmit and receive bandwidth, integrated DPD, fast frequency hopping | 196-Ball CSPBGA (12 mm × 12 mm × 1.17mm) | Sourced to order | |
| ADRV9003BBCZ | Analog Devices | RF transceiver, one transmit and two receive channels, 30 MHz to 6 GHz, 12 kHz to 40 MHz bandwidth | 196-Ball CSPBGA (12 mm × 12 mm × 1.17mm) | Sourced to order | |
| ADRV9004BBCZ | Analog Devices | Dual channel RF transceiver, 30 MHz to 6 GHz, 12 kHz to 40 MHz transmit and receive bandwidth, fast frequency hopping | 196-Ball CSPBGA (12 mm × 12 mm × 1.17mm) | Sourced to order | |
| ADRV9361-Z7035 | Analog Devices | Software defined radio system on module, AD9361 2 x 2 transceiver with Xilinx Zynq XC7Z035 SoC | In stock | ||
| SX1262IMLTRT | Semtech | LoRa and FSK sub GHz transceiver, 150 to 960 MHz, +22 dBm PA, sensitivity to minus 148 dBm, 4.2 mA receive current | Sourced to order | ||
| SX1280IMLTRT | Semtech | 2.4 GHz LoRa, FLRC and GFSK transceiver with ranging engine, +12.5 dBm PA, sensitivity to minus 132 dBm | QFN 4x4 | Sourced to order |
Parts not shown are sourced to order from authorized US distributors. Add them by part number on the request page. We reply within two working days, with a quote or with the questions we need answered first.
Questions
Do you source complete radios?
Complete datalinks and mesh radios are quoted to order on the systems page. This page holds the parts a radio or a software defined radio is built from.
Do you source power amplifiers?
Yes, by orderable part number. When a line requires a US export license, we file for it and quote it subject to approval. Ask us.